Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 1115

Discontinued Command
TRIGger:TV:TVHFrej
TRIGger:TV:VIR
:TRIGger:USB:SOURce:DMINu
s
:TRIGger:USB:SOURce:DPLus
:TRIGger:USB:SPEed
:TRIGger:USB:TRIGger
VAUToscale
Discontinued
Some previous oscilloscope queries returned control setting values of OFF
Parameters
and ON. The InfiniiVision 4000 X- Series oscilloscopes only return the
enumerated values 0 (for off) and 1 (for on).
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Obsolete and Discontinued Commands
Current Command Equivalent
none
none
none
none
none
none
Comments
These USB trigger commands
are superseded by commands
that are available with the
DSOX4USBFL (USB 2.0
Full/Low Speed) or
DSOX4USBH (USB 2.0 High
Speed) serial decode and
triggering licenses. See
":SBUS<n>:USB Commands"
on page 792.
36
1115