Trigger:tv:udtv:pgthan - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:TRIGger:TV:UDTV:PGTHan

Command Syntax
:TRIGger:TV:UDTV:PGTHan <min_time>
<min_time> ::= seconds in NR3 format
The :TRIGger:TV:UDTV:PGTHan command specifies the "greater than the
sync pulse width" time in the Generic video trigger. This setting allows
oscilloscope synchronization to the vertical sync.
Query Syntax
:TRIGger:TV:UDTV:PGTHan?
The :TRIGger:TV:UDTV:PGTHan query returns the "greater than the sync
pulse width" time setting.
Return Format
<min_time><NL>
<min_time> ::= seconds in NR3 format
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":TRIGger:TV:STANdard"
":TRIGger:TV:UDTV:ENUMber"
":TRIGger:TV:UDTV:HSYNc"
on page 1007
on page 1008
on page 1009
32
:TRIGger Commands
1011