Search:serial:lin:pattern:format - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:SERial:LIN:PATTern:FORMat

Command Syntax
:SEARch:SERial:LIN:PATTern:FORMat <base>
<base> ::= {HEX | DECimal}
The :SEARch:SERial:LIN:PATTern:FORMat command specifies the number
base used with the :SEARch:SERial:LIN:PATTern:DATA command.
Query Syntax
:SEARch:SERial:LIN:PATTern:FORMat?
The :SEARch:SERial:LIN:PATTern:FORMat? query returns the current
number base setting.
Return Format
<base><NL>
<base> ::= {HEX | DEC}
See Also
•
•
878
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:SERial:LIN:PATTern:DATA"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 876