System:touch - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

30
:SYSTem Commands

:SYSTem:TOUCh

Command Syntax
:SYSTem:TOUCh <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:TOUCh command disables or enables the touchscreen.
Query Syntax
:SYSTem:TOUCh? <time>
The :SYSTem:TOUCh? query returns the touchscreen's on/off status.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also
•
922
(see page 1208)
"Introduction to :SYSTem Commands"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 910