Sbus<N>:Usb:base - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:USB:BASE
(see page 1208)
Command Syntax
:SBUS<n>:USB:BASE <base>
<base> ::= {ASCii | BINary | DECimal | HEX}
The :SBUS<n>:USB:BASE command determines the base to use for the USB
decode and Lister display, controlling how the data or payload field is
displayed.
All other fields are displayed in hex
Query Syntax
:SBUS<n>:USB:BASE?
The :SBUS<n>:USB:BASE? query returns the currently specified base.
Return Format
<base><NL>
<base> ::= {ASC | BIN | DEC | HEX}
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 795