Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 185

5
Common (*) Commands
*TST (Self Test)
(see page 1208)
Query Syntax
*TST?
The *TST? query performs a self- test on the instrument. The result of the
test is placed in the output queue. A zero indicates the test passed and a
non- zero indicates the test failed. If the test fails, refer to the
troubleshooting section of the Service Guide.
Return Format
<result><NL>
<result> ::= 0 or non-zero value; an integer in NR1 format
See Also
• "Introduction to Common (*) Commands" on page 164
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 185