Measure:xmax - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

21
:MEASure Commands

:MEASure:XMAX

Command Syntax
:MEASure:XMAX [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:XMAX command installs a screen measurement and starts
an X- at- Max- Y measurement on the selected window. If the optional
source parameter is specified, the current source is modified.
:MEASure:XMAX is an alias for :MEASure:TMAX.
N O T E
Query Syntax
:MEASure:XMAX? [<source>]
The :MEASure:XMAX? query measures and returns the horizontal axis
value at which the maximum vertical value occurs. If the optional source
is specified, the current source is modified. If all channels are off, the
query returns 9.9E+37.
Return Format
<value><NL>
<value> ::= horizontal value of the maximum in NR3 format
See Also
•
•
•
482
(see page 1208)
"Introduction to :MEASure Commands"
":MEASure:XMIN" on page 483
":MEASure:TMAX" on page 1140
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 420