Waveform:source - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:WAVeform:SOURce

Command Syntax
:WAVeform:SOURce <source>
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>
<source> ::= {CHANnel<n> | POD{1 | 2} | BUS{1 | 2} | FUNCtion<m>
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :WAVeform:SOURce command selects the analog channel, function,
digital pod, digital bus, reference waveform, or serial decode bus to be
used as the source for the :WAVeform commands.
Function capabilities include add, subtract, multiply, integrate,
differentiate, and FFT (Fast Fourier Transform) operations.
When the :WAVeform:SOURce is the serial decode bus (SBUS1 or SBUS2),
ASCii is the only waveform format allowed, and the :WAVeform:DATA?
query returns a string with timestamps and associated bus decode
information.
With MSO oscilloscope models, you can choose a POD or BUS as the
waveform source. There are some differences between POD and BUS when
formatting and getting data from the oscilloscope:
• When POD1 or POD2 is selected as the waveform source, you can
• When BUS1 or BUS2 is selected as the waveform source, you can
Query Syntax
:WAVeform:SOURce?
The :WAVeform:SOURce? query returns the currently selected source for
the WAVeform commands.
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
| SBUS{1 | 2}} for DSO models
| MATH<m> | WMEMory<r> | SBUS{1 | 2}}
for MSO models
choose the BYTE, WORD, or ASCii formats (see
page 1031).
When the WORD format is chosen, every other data byte will be 0. The
setting of :WAVeform:BYTeorder controls which byte is 0.
When the ASCii format is chosen, the :WAVeform:DATA? query returns a
string with unsigned decimal values separated by commas.
choose the WORD or ASCii formats (but not BYTE because bus values
are always returned as 16- bit values).
When the ASCii format is chosen, the :WAVeform:DATA? query returns a
string with hexadecimal bus values, for example: 0x1938,0xff38,...
:WAVeform Commands
":WAVeform:FORMat"
33
on
1041