Compliance:usb:source:dplus - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:COMPliance:USB:SOURce:DPLus

Command Syntax
:COMPliance:USB:SOURce:DPLus <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :COMPliance:USB:SOURce:DPLus command specifes the analog input
channel that is probing the D+ signal.
On 4- channel oscilloscopes, you are forced to use different channel pairs
for the D+ and D- signals. This provides the maximum sample rate.
(Channels 1 and 2 are one pair and channels 3 and 4 are the other pair.)
Query Syntax
:COMPliance:USB:SOURce:DPLus?
The :COMPliance:USB:SOURce:DPLus? query returns the specified analog
input channel.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also •
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":COMPliance:USB:SOURce:DMINus"
":COMPliance:USB:SOURce:ADJacent"
:COMPliance Commands
on page 288
on page 286
11
289