Channel<N>:Display - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

10
:CHANnel<n> Commands
:CHANnel<n>:DISPlay
Command Syntax
:CHANnel<n>:DISPlay <display value>
<display value> ::= {{1 | ON} | {0 | OFF}}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:DISPlay command turns the display of the specified
channel on or off.
Query Syntax
:CHANnel<n>:DISPlay?
The :CHANnel<n>:DISPlay? query returns the current display setting for
the specified channel.
Return Format
<display value><NL>
<display value> ::= {1 | 0}
See Also •
•
•
•
•
•
268
(see page 1208)
"Introduction to :CHANnel<n> Commands"
":VIEW" on page 226
":BLANk" on page 198
":STATus" on page 223
":POD<n>:DISPlay" on page 543
":DIGital<d>:DISPlay"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 303
on page 264