Search:edge:source - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:EDGE:SOURce

Command Syntax
:SEARch:EDGE:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:EDGE:SOURce command selects the channel on which to
search for edges.
Query Syntax
:SEARch:EDGE:SOURce?
The :SEARch:EDGE:SOURce? query returns the current source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also
•
824
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide