Wgen<W>:Function:pulse:width - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

34
:WGEN<w> Commands
:WGEN<w>:FUNCtion:PULSe:WIDTh
Command Syntax
:WGEN<w>:FUNCtion:PULSe:WIDTh <width>
<w> ::= 1 or 2 in NR1 format
<width> ::= pulse width in seconds in NR3 format
For Pulse waveforms, the :WGEN<w>:FUNCtion:PULSe:WIDTh command
specifies the width of the pulse.
The pulse width can be adjusted from 20 ns to the period minus 20 ns.
Query Syntax
:WGEN<w>:FUNCtion:PULSe:WIDTh?
The :WGEN<w>:FUNCtion:PULSe:WIDTh? query returns the currently set
pulse width.
Return Format
<width><NL>
<width> ::= pulse width in seconds in NR3 format
See Also
•
•
1070
(see page 1208)
"Introduction to :WGEN<w> Commands"
":WGEN<w>:FUNCtion"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1058
on page 1067