Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 184

5
Common (*) Commands
*TRG (Trigger)
Command Syntax
*TRG
The *TRG command has the same effect as the :DIGitize command with no
parameters.
See Also •
•
•
•
184
(see page 1208)
"Introduction to Common (*) Commands"
":DIGitize" on page 199
":RUN" on page 220
":STOP" on page 224
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 164