Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 366

17
:FUNCtion<m> Commands
:FUNCtion<m>:SOURce2
Command Syntax
:FUNCtion<m>:SOURce2 <value>
<m> ::= 1-4 in NR1 format
<value> ::= {CHANnel<n> | NONE}
<n> ::= 1 to (# analog channels) in NR1 format
The :FUNCtion<m>:SOURce2 command specifies the second source for
math operator functions that have two sources. (The
:FUNCtion<m>:SOURce1 command specifies the first source.)
The :FUNCtion<m>:SOURce2 setting is not used for the transform
functions, filter functions, or visualization functions (except when the
measurement trend visualization's measurement requires two sources).
Query Syntax
:FUNCtion<m>:SOURce2?
The :FUNCtion<m>:SOURce2? query returns the currently specified second
source for math operations.
Return Format
<value><NL>
<value> ::= {CHAN<n> | NONE}
<n> ::= 1 to (# analog channels) in NR1 format
See Also •
•
•
366
(see page 1208)
"Introduction to :FUNCtion<m> Commands"
":FUNCtion<m>:OPERation"
":FUNCtion<m>:SOURce1"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 340
on page 358
on page 364