Search:serial:usb:mode - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:SERial:USB:MODE

Command Syntax
:SEARch:SERial:USB:MODE <mode>
<mode> ::= {TOKen | DATA | HANDshake | SPECial | ALLerrors
The :SEARch:SERial:USB:MODE command specifies the USB search mode.
Query Syntax
:SEARch:SERial:USB:MODE?
The :SEARch:SERial:USB:MODE? query returns the specified USB search
mode.
Return Format
<mode><NL>
<mode> ::= {TOK | DATA | HAND | SPEC | ALL | PID | CRC5
See Also •
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
| PIDerror | CRC5error | CRC16error | GLITcherror
| STUFFerror | SE1error}
| CRC16 | GLIT | STUFF | SE1}
":SEARch:SERial:USB:PID:DATA"
":SEARch:SERial:USB:PID:HANDshake"
":SEARch:SERial:USB:PID:SPECial"
":SEARch:SERial:USB:PID:TOKen"
:SEARch Commands
on page 902
on page 903
on page 904
on page 905
29
893