Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 140

4
Commands Quick Reference
Table 49 :SYSTem Commands Summary
Command
:SYSTem:DATE <date>
(see page 911)
:SYSTem:DSP <string>
(see page 912)
n/a
:SYSTem:LOCK <value>
(see page 914)
:SYSTem:PRESet (see
page 915)
:SYSTem:PROTection:LO
CK <value> (see
page 918)
:SYSTem:SETup
<setup_data> (see
page 919)
:SYSTem:TIME <time>
(see page 921)
:SYSTem:TOUCh {{1 |
ON} | {0 | OFF}} (see
page 922)
Table 50 :TIMebase Commands Summary
Command
:TIMebase:MODE
<value> (see
page 925)
:TIMebase:POSition
<pos> (see page 926)
140
Query
:SYSTem:DATE? (see
page 911)
n/a
:SYSTem:ERRor? (see
page 913)
:SYSTem:LOCK? (see
page 914)
n/a
:SYSTem:PROTection:LO
CK? (see page 918)
:SYSTem:SETup? (see
page 919)
:SYSTem:TIME? (see
page 921)
:SYSTem:TOUCh? (see
page 922)
Query
:TIMebase:MODE? (see
page 925)
:TIMebase:POSition?
(see page 926)
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Options and Query Returns
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1
format
<month> ::= {1,..,12 | JANuary |
FEBruary | MARch | APRil | MAY |
JUNe | JULy | AUGust | SEPtember
| OCTober | NOVember | DECember}
<day> ::= {1,..31}
<string> ::= up to 75 characters
as a quoted ASCII string
<error> ::= an integer error code
<error string> ::= quoted ASCII
string.
See Error Messages (see
page 1167).
<value> ::= {{1 | ON} | {0 |
OFF}}
See :SYSTem:PRESet (see
page 915)
<value> ::= {{1 | ON} | {0 |
OFF}}
<setup_data> ::= data in IEEE
488.2 # format.
<time> ::= hours,minutes,seconds
in NR1 format
{1 | 0}
Options and Query Returns
<value> ::= {MAIN | WINDow | XY |
ROLL}
<pos> ::= time from the trigger
event to the display reference
point in NR3 format