Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 222

6
Root (:) Commands
:SINGle
Command Syntax
:SINGle
The :SINGle command causes the instrument to acquire a single trigger of
data. This is the same as pressing the Single key on the front panel.
See Also •
•
•
222
(see page 1208)
"Introduction to Root (:) Commands"
":RUN" on page 220
":STOP" on page 224
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 190