Measure:statistics:rsdeviation - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:MEASure:STATistics:RSDeviation

Command Syntax
:MEASure:STATistics:RSDeviation {{0 | OFF} | {1 | ON}}
The :MEASure:STATistics:RSDeviation command disables or enables
relative standard deviations, that is, standard deviation/mean, in the
measurement statistics.
Query Syntax
:MEASure:STATistics:RSDeviation?
The :MEASure:STATistics:RSDeviation? query returns the current relative
standard deviation setting.
Return Format
{0 | 1}<NL>
See Also
•
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :MEASure Commands"
":MEASure:RESults" on page 452
":MEASure:STATistics"
":MEASure:STATistics:DISPlay"
":MEASure:STATistics:MCOunt"
":MEASure:STATistics:RESet"
":MEASure:STATistics:INCRement"
on page 420
on page 460
on page 461
on page 463
on page 464
on page 462
21
:MEASure Commands
465