Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 613

Recall previously saved oscilloscope setups, reference waveforms, and
masks.
Table 101 :RECall Commands Summary
Command
:RECall:ARBitrary:[ST
ARt] [<file_spec>][,
<column>][,
<wavegen_id>] (see
page 615)
:RECall:FILename
<base_name> (see
page 616)
:RECall:MASK[:STARt]
[<file_spec>] (see
page 617)
:RECall:PWD
<path_name> (see
page 618)
Agilent InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
26
:RECall Commands
Query
n/a
:RECall:FILename?
(see page 616)
n/a
:RECall:PWD? (see
page 618)
s1
Options and Query Returns
<file_spec> ::= {<internal_loc>
| <file_name>}
<column> ::= Column in CSV file
to load. Column number starts
from 1.
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<wavegen_id> ::= {WGEN1 | WGEN2}
<base_name> ::= quoted ASCII
string
<file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<path_name> ::= quoted ASCII
string
613