Waveform:byteorder - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:WAVeform:BYTeorder

Command Syntax
:WAVeform:BYTeorder <value>
<value> ::= {LSBFirst | MSBFirst}
The :WAVeform:BYTeorder command sets the output sequence of the WORD
data. The parameter MSBFirst sets the most significant byte to be
transmitted first. The parameter LSBFirst sets the least significant byte to
be transmitted first. This command affects the transmitting sequence only
when :WAVeform:FORMat WORD is selected. The default setting is
LSBFirst.
Query Syntax
:WAVeform:BYTeorder?
The :WAVeform:BYTeorder query returns the current output sequence.
Return Format
<value><NL>
<value> ::= {LSBF | MSBF}
See Also
•
•
•
•
Example Code •
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :WAVeform Commands"
":WAVeform:DATA" on page 1029
":WAVeform:FORMat"
":WAVeform:PREamble"
"Example Code" on page 1042
"Example Code" on page 1037
on page 1021
on page 1031
on page 1036
33
:WAVeform Commands
1027