Acquire:segmented:analyze; Acquire:segmented:co - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

7
:ACQuire Commands

:ACQuire:SEGMented:ANALyze

Command Syntax
:ACQuire:SEGMented:ANALyze
This command is available when the segmented memory option (Option SGM) is enabled.
N O T E
This command calculates measurement statistics and/or infinite
persistence over all segments that have been acquired. It corresponds to
the front panel Analyze Segments softkey which appears in both the
Measurement Statistics and Segmented Memory Menus.
In order to use this command, the oscilloscope must be stopped and in
segmented acquisition mode, with either quick measurements or infinite
persistence on.
See Also
•
•
•
234
(see page 1208)
":ACQuire:MODE" on page 231
":ACQuire:SEGMented:COUNt"
"Introduction to :ACQuire Commands"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 235
on page 227