Demo:output - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:DEMO:OUTPut

Command Syntax
:DEMO:OUTPut <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}
The :DEMO:OUTPut command specifies whether the demo signal output is
ON (1) or OFF (0).
Query Syntax
:DEMO:OUTPut?
The :DEMO:OUTPut? query returns the current state of the demo signal
output setting.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :DEMO Commands"
":DEMO:FUNCtion" on page 294
:DEMO Commands
on page 293
12
299