Search:transition:slope - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:TRANsition:SLOPe

Command Syntax
:SEARch:TRANsition:SLOPe <slope>
<slope> ::= {NEGative | POSitive}
The :SEARch:TRANsition:SLOPe command selects whether to search for
rising edge (POSitive slope) transitions or falling edge (NEGative slope)
transitions.
Query Syntax
:SEARch:TRANsition:SLOPe?
The :SEARch:TRANsition:SLOPe? query returns the current transition
search slope setting.
Return Format
<slope><NL>
<slope> ::= {NEG | POS}
See Also
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:MODE" on page 820
":SEARch:TRANsition:SOURce"
":SEARch:TRANsition:TIME"
on page 840
on page 841
29
:SEARch Commands
839