21
:MEASure Commands
:MEASure:STATistics
Command Syntax
:MEASure:STATistics <type>
<type> ::= {{ON | 1} | CURRent | MINimum | MAXimum | MEAN | STDDev
The :MEASure:STATistics command determines the type of information
returned by the :MEASure:RESults? query. ON means all the statistics are
on.
Query Syntax
:MEASure:STATistics?
The :MEASure:STATistics? query returns the current statistics mode.
Return Format
<type><NL>
<type> ::= {ON | CURR | MIN | MAX | MEAN | STDD | COUN}
See Also
•
•
•
•
•
Example Code
•
460
(see
page
1208)
| COUNt}
"Introduction to :MEASure Commands"
":MEASure:RESults"
on page 452
":MEASure:STATistics:DISPlay"
":MEASure:STATistics:RESet"
":MEASure:STATistics:INCRement"
"Example Code"
on page 452
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 420
on page 461
on page 464
on page 462