Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 417

Table 96 :MEASure Commands Summary (continued)
Command
n/a
:MEASure:VAMPlitude
[<source>] (see
page 471)
:MEASure:VAVerage
[<interval>][,<source
>] (see page 472)
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Query
:MEASure:TVALue?
<value>,
[<slope>]<occurrence>
[,<source>] (see
page 469)
:MEASure:VAMPlitude?
[<source>] (see
page 471)
:MEASure:VAVerage?
[<interval>][,<source
>] (see page 472)
:MEASure Commands
Options and Query Returns
<value> ::= voltage level that
the waveform must cross.
<slope> ::= direction of the
waveform when <value> is crossed.
<occurrence> ::= transitions
reported.
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | FUNCtion<m> |
MATH<m> | WMEMory<r>} for MSO
models
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<return_value> ::= time in
seconds of specified voltage
crossing in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= the amplitude
of the selected waveform in volts
in NR3 format
<interval> ::= {CYCLe | DISPlay}
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= calculated
average voltage in NR3 format
21
417