23
:MTESt Commands
:MTESt:COUNt:FWAVeforms
Query Syntax
:MTESt:COUNt:FWAVeforms? [CHANnel<n>]
<n> ::= 1 to (# analog channels) in NR1 format
The :MTESt:COUNt:FWAVeforms? query returns the total number of failed
waveforms in the current mask test run. This count is for all regions and
all waveforms collected on the channel specified by the optional parameter
or collected on the currently specified source channel (:MTESt:SOURce) if
there is no parameter.
Return Format
<failed><NL>
<failed> ::= number of failed waveforms in NR1 format.
See Also
•
•
•
•
•
Example Code
•
518
(see
page
1208)
"Introduction to :MTESt Commands"
":MTESt:COUNt:WAVeforms"
":MTESt:COUNt:TIME"
":MTESt:COUNt:RESet"
":MTESt:SOURce"
on page 539
"Example Code"
on page 509
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 509
on page 521
on page 520
on page 519