Power:switch:vreference - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:POWer:SWITch:VREFerence

Command Syntax
:POWer:SWITch:VREFerence <percent>
<percent> ::= percent in NR1 format
The :POWer:SWITch:VREFerence command to specify the voltage switching
level for the switching edges. The value is in percentage of the maximum
switch voltage.
You can adjust this value to ignore noise floors.
This value specifies the threshold that is used to determine the switching
edges.
Query Syntax
:POWer:SWITch:VREFerence?
The :POWer:SWITch:VREFerence query returns the voltage switching level
percent value.
Return Format
<percent><NL>
<percent> ::= percent in NR1 format
See Also
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":POWer:SWITch:APPLy"
":POWer:SWITch:CONDuction"
":POWer:SWITch:IREFerence"
":POWer:SWITch:RDS"
":POWer:SWITch:VCE"
on page 602
on page 603
on page 604
on page 605
on page 606
25
:POWer Commands
607