Power:inrush:apply - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:POWer:INRush:APPLy

Command Syntax
:POWer:INRush:APPLy
The :POWer:INRush:APPLy command applies the inrush current analysis.
The Inrush current analysis measures the peak inrush current of the
power supply when the power supply is first turned on.
See Also •
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":MEASure:PCURrent"
":POWer:INRush:EXIT"
":POWer:INRush:NEXT"
on page 500
on page 566
on page 567
25
:POWer Commands
565