Recall:wmemory<R>[:Start] - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

26
:RECall Commands
:RECall:WMEMory<r>[:STARt]
Command Syntax
:RECall:WMEMory<r>[:STARt] [<file_name>]
<r> ::= 1 to (# ref waveforms) in NR1 format
<file_name> ::= quoted ASCII string
The :RECall:WMEMory<r>[:STARt] command recalls a reference waveform.
If a file extension is provided as part of a specified <file_name>, it must be ".h5".
N O T E
See Also
•
•
•
620
(see page 1208)
"Introduction to :RECall Commands"
":RECall:FILename" on page 616
":SAVE:WMEMory[:STARt]"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 614
on page 644