Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 296

12
:DEMO Commands
Demo Signal
Function
SPI
I2S
CANLin
ARINc
FLEXray
MIL
MIL2
USB
NMONotonic
296
Demo 1 Terminal
Off
Signals are internally routed to digital
channels D6 through D9:
•
D9 — MOSI, TTL level, with MSB
out 1st (internally routed to digital
input).
•
D8 — MISO, TTL level, with MSB
out 1st (internally routed to digital
input).
•
D7 — CLK, TTL level (internally
routed to digital input).
•
D6 — ~CS, low-enable, TTL level
(internally routed to digital input).
Off
Signals are internally routed to digital
channels D7 through D9:
•
D9 — SDATA, TTL level, with
"standard" alignment (internally
routed to digital input).
•
D8 — SCLK, TTL level, (internally
routed to digital input).
•
D7 — WS, TTL level, low for left
channel, high for right channel
(internally routed to digital input)
CAN_L, 250 kbps dominant-low,
~2.8 Vpp, ~1.4 V offset
ARINC 429, 100 kbps, ~5 Vpp, ~0 V
offset.
FlexRay @ 10 Mbps, ~2.8 Vpp, ~0 V
offset
MIL-STD-1553 RT to RT transfer,
received ~1.3 Vpp, transmitted
~4.8 Vpp, 0 V offset
MIL-STD-1553 RT to RT transfer,
received ~1.3 Vpp, transmitted
~4.8 Vpp, 0 V offset
USB Low Speed D+ signal, ~2.8 Vpp,
1.4 V offset
Digital pulse train with infrequent
non-monotonic rising edges @ ~
2.85 Vpp, 1.42 V offset
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Demo 2 Terminal
Off
Off
LIN, 19.2 kbps, ~2.8 Vpp, ~1.4 V
offset
Off
Off
Off
MIL-STD-1553 RT to BC transfer,
received ~1.3 Vpp, transmitted
~4.8 Vpp, 0 V offset
USB Low Speed D- signal, ~2.8 Vpp,
1.4 V offset
Off