Search:transition:time - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:TRANsition:TIME

Command Syntax
:SEARch:TRANsition:TIME <time>[suffix]
<time> ::= floating-point number in NR3 format
[suffix] ::= {s | ms | us | ns | ps}
The :SEARch:TRANsition:TIME command sets the time of the transition to
search for. You can search for transitions greater than or less than this
time.
Query Syntax
:SEARch:TRANsition:TIME?
The :SEARch:TRANsition:TIME? query returns the current transition time
value.
Return Format
<time><NL>
<time> ::= floating-point number in NR3 format
See Also
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:TRANsition:QUALifier"
:SEARch Commands
on page 838
29
841