Acquire:segmented:index <Index - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

7
:ACQuire Commands
:ACQuire:SEGMented:INDex
Command Syntax
:ACQuire:SEGMented:INDex <index>
<index> ::= an integer from 1 to 1000 (w/4M memory) in NR1 format
This command is available when the segmented memory option (Option SGM) is enabled.
N O T E
The :ACQuire:SEGMented:INDex command sets the index into the memory
segments that have been acquired.
The segmented memory acquisition mode is enabled with the
:ACQuire:MODE command. The number of segments to acquire is set using
the :ACQuire:SEGMented:COUNt command, and data is acquired using the
:DIGitize, :SINGle, or :RUN commands. The number of memory segments
that have been acquired is returned by the :WAVeform:SEGMented:COUNt?
query. The time tag of the currently indexed memory segment is returned
by the :WAVeform:SEGMented:TTAG? query.
The maximum number of segments may be limited by the memory depth
of your oscilloscope. For example, an oscilloscope with 1M memory allows
a maximum of 250 segments.
Query Syntax
:ACQuire:SEGMented:INDex?
The :ACQuire:SEGMented:INDex? query returns the current segmented
memory index setting.
Return Format
<index><NL>
<index> ::= an integer from 1 to 1000 (w/4M memory) in NR1 format
See Also
•
•
•
•
•
•
•
•
•
Example Code
' Segmented memory commands example.
' -------------------------------------------------------------------
236
(see page 1208)
":ACQuire:MODE" on page 231
":ACQuire:SEGMented:COUNt"
":DIGitize" on page 199
":SINGle" on page 222
":RUN" on page 220
":WAVeform:SEGMented:COUNt"
":WAVeform:SEGMented:TTAG"
":ACQuire:SEGMented:ANALyze"
"Introduction to :ACQuire Commands"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 235
on page 1039
on page 1040
on page 234
on page 227