Timebase:window:position - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

31
:TIMebase Commands

:TIMebase:WINDow:POSition

Command Syntax
:TIMebase:WINDow:POSition <pos value>
<pos value> ::= time from the trigger event to the zoomed (delayed)
The :TIMebase:WINDow:POSition command sets the horizontal position in
the zoomed (delayed) view of the main sweep. The main sweep range and
the main sweep horizontal position determine the range for this command.
The value for this command must keep the zoomed view window within
the main sweep range.
Query Syntax
:TIMebase:WINDow:POSition?
The :TIMebase:WINDow:POSition? query returns the current horizontal
window position setting in the zoomed view.
Return Format
<value><NL>
<value> ::= position value in seconds
See Also
•
•
•
•
•
•
•
932
(see page 1208)
view reference point in NR3 format
"Introduction to :TIMebase Commands"
":TIMebase:MODE" on page 925
":TIMebase:POSition"
":TIMebase:RANGe" on page 927
":TIMebase:SCALe" on page 930
":TIMebase:WINDow:RANGe"
":TIMebase:WINDow:SCALe"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 924
on page 926
on page 933
on page 934