Search:glitch:source - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:GLITch:SOURce

Command Syntax
:SEARch:GLITch:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:GLITch:SOURce command selects the channel on which to
search for glitches (pulse widths).
Query Syntax
:SEARch:GLITch:SOURce?
The :SEARch:GLITch:SOURce? query returns the current pulse width
source.
If all channels are off, the query returns "NONE."
Return Format
<source><NL>
See Also
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:MODE" on page 820
":SEARch:GLITch:POLarity"
":SEARch:GLITch:QUALifier"
":SEARch:GLITch:RANGe"
on page 828
on page 829
on page 830
29
:SEARch Commands
831