Wgen<W>:Track:csignal - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

34
:WGEN<w> Commands
:WGEN<w>:TRACk:CSIGnal
Command Syntax
:WGEN<w>:TRACk:CSIGnal
The :WGEN<w>:TRACk:CSIGnal command sets the other waveform
generator output to be identical to this waveform generator output (except
that the shape of either output may be inverted).
If the signal selected is ARB, the ARB waveform is copied as well.
See Also
•
•
•
1092
(see page 1208)
":WGEN<w>:TRACk"
":WGEN<w>:TRACk:AMPLitude"
":WGEN<w>:TRACk:FREQuency"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1090
on page 1091
on page 1093