:FUNCtion<m>:DISPlay
Command Syntax
:FUNCtion<m>:DISPlay <display>
<m> ::= 1-4 in NR1 format
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion<m>:DISPlay command turns the display of the function on
or off. When ON is selected, the function performs as specified using the
other FUNCtion commands. When OFF is selected, function is neither
calculated nor displayed.
Query Syntax
:FUNCtion<m>:DISPlay?
The :FUNCtion<m>:DISPlay? query returns whether the function display is
on or off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see
page
1208)
"Introduction to :FUNCtion<m> Commands"
":VIEW"
on page 226
":BLANk"
on page 198
":STATus"
on page 223
:FUNCtion<m> Commands
on page 340
17
347