Trigger:zone<N>:Validity - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:TRIGger:ZONE<n>:VALidity
Query Syntax
:TRIGger:ZONE<n>:VALidity?
<n> ::= 1-2 in NR1 format
The :TRIGger:ZONE<n>:VALidity? query returns the validity of Zone 1 or
Zone 2.
• INValid is returned (for Zone 2 only) when Zone 1 and Zone 2 overlap
• OSCReen (off- screen) is returned when the associated zone is
• A zone is valid when it is neither invalid nor off- screen.
The validity of a zone is not affected by the zone's state. For example, a
zone can be valid and off. You cannot directly set the validity of a zone.
Return Format
<validity><NL>
<validity> ::= {VALid | INValid | OSCReen}
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
and have opposing qualifying conditions (modes). Zone 1 can never be
invalid.
off- screen, and thus not being used to qualify the trigger.
":TRIGger:ZONE<n>:STATe"
":TRIGger:ZONE<n>:MODE"
":TRIGger:ZONE<n>:PLACement"
on page 1018
on page 1015
on page 1016
32
:TRIGger Commands
1017