Search:serial:can:pattern:data:length - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:SERial:CAN:PATTern:DATA:LENGth

Command Syntax
:SEARch:SERial:CAN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :SEARch:SERial:CAN:PATTern:DATA:LENGth command specifies the
length of the data value when searching for Data Frame ID and Data.
The data value is specified using the :SEARch:SERial:CAN:PATTern:DATA
command.
Query Syntax
:SEARch:SERial:CAN:PATTern:DATA:LENGth?
The :SEARch:SERial:CAN:PATTern:DATA:LENGth? query returns the
current data length setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 8 in NR1 format
See Also •
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:SERial:CAN:MODE"
":SEARch:SERial:CAN:PATTern:DATA"
on page 849
on page 850
29
:SEARch Commands
851