Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 223

:STATus
Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | SBUS{1 | 2}
<source> ::= {CHANnel<n> | DIGital<d> | POD{1 | 2}
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :STATus? query reports whether the channel, function, serial decode
bus, or reference waveform location specified by <source> is displayed.
MATH<m> is an alias for FUNCtion<m>.
N O T E
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
•
•
•
•
•
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
| WMEMory<r>}
for the DSO models
| BUS{1 | 2} | FUNCtion<m> | MATH<m> | SBUS{1 | 2}
| WMEMory<r>}
for the MSO models
"Introduction to Root (:) Commands"
":BLANk" on page 198
":CHANnel<n>:DISPlay"
":DIGital<d>:DISPlay"
":FUNCtion<m>:DISPlay"
":POD<n>:DISPlay" on page 543
":SBUS<n>:DISPlay" on page 648
":WMEMory<r>:DISPlay"
":VIEW" on page 226
on page 190
on page 268
on page 303
on page 347
on page 1102
6
Root (:) Commands
223