Measure:vmin - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:MEASure:VMIN

Command Syntax
:MEASure:VMIN [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:VMIN command installs a screen measurement and starts a
minimum vertical value measurement. If the optional source parameter is
specified, the current source is modified.
Query Syntax
:MEASure:VMIN? [<source>]
The :MEASure:VMIN? query measures and outputs the minimum vertical
value present on the selected waveform.
Return Format
<value><NL>
<value> ::= minimum vertical value of the selected waveform in
See Also •
•
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
NR3 format
"Introduction to :MEASure Commands"
":MEASure:SOURce"
":MEASure:VBASe" on page 473
":MEASure:VMAX" on page 474
":MEASure:VPP" on page 476
on page 420
on page 458
21
:MEASure Commands
475