Function:goft:operation - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

36
Obsolete and Discontinued Commands

:FUNCtion:GOFT:OPERation

Command Syntax
:FUNCtion:GOFT:OPERation <operation>
<operation> ::= {ADD | SUBTract | MULTiply}
The :FUNCtion:GOFT:OPERation command sets the math operation for the
g(t) source that can be used as the input to transform or filter functions
(if available):
• ADD — Source1 + source2.
• SUBTract — Source1 - source2.
• MULTiply — Source1 * source2.
The :FUNCtion:GOFT:SOURce1 and :FUNCtion:GOFT:SOURce2 commands
are used to select source1 and source2.
1126
(see page 1208)
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide