Search:serial:i2S:audio - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:SERial:I2S:AUDio

Command Syntax
:SEARch:SERial:I2S:AUDio <audio_ch>
<audio_ch> ::= {RIGHt | LEFT | EITHer}
The :SEARch:SERial:I2S:AUDio command specifies the channel on which to
search for I2S events: right, left, or either channel.
Query Syntax
:SEARch:SERial:I2S:AUDio?
The :SEARch:SERial:I2S:AUDio? query returns the current channel setting.
Return Format
<audio_ch><NL>
<audio_ch> ::= {RIGH | LEFT | EITH}
See Also •
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:SERial:I2S:MODE" on page 862
29
:SEARch Commands
861