32
:TRIGger Commands
:TRIGger:ZONE:SOURce
(see
page
1208)
Command Syntax
:TRIGger:ZONE:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :TRIGger:ZONE:SOURce command sets the analog source channel
shared by all zones.
Query Syntax
:TRIGger:ZONE:SOURce?
The :TRIGger:ZONE:SOURce? query returns the analog source channel
specified for zone qualified triggers.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also
•
":TRIGger:ZONE:STATe"
on page 1014
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
1013