Sbus<N>:Uart:width - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SBUS<n>:UART:WIDTh
Command Syntax
:SBUS<n>:UART:WIDTh <width>
<width> ::= {5 | 6 | 7 | 8 | 9}
The :SBUS<n>:UART:WIDTh command determines the number of bits (5- 9)
for each message "byte" for the serial decoder and/or trigger when in
UART mode.
Query Syntax
:SBUS<n>:UART:WIDTh?
The :SBUS<n>:UART:WIDTh? query returns the current UART width
setting.
Return Format
<width><NL>
<width> ::= {5 | 6 | 7 | 8 | 9}
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 944
":SBUS<n>:UART:TRIGger:TYPE"
:SBUS<n> Commands
on page 935
on page 790
28
791