Wgen<W>:Track:amplitude - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:WGEN<w>:TRACk:AMPLitude
Command Syntax
:WGEN<w>:TRACk:AMPLitude <on_off>
<w> ::= 1 or 2 in NR1 format
<on_off> ::= {{1 | ON} | {0 | OFF}
The :WGEN<w>:TRACk:AMPLitude ON command causes amplitude and
offset adjustments to this waveform generator output signal to be tracked
by the other waveform generator output.
Also, when tracking is enabled, adjustments for tracked settings in the
other waveform generator become unavailable (ghosted).
Query Syntax
:WGEN<w>:TRACk:AMPLitude?
The :WGEN<w>:TRACk:AMPLitude? query returns whether amplitude
tracking is on or off.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also •
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
":WGEN<w>:TRACk"
":WGEN<w>:TRACk:FREQuency"
":WGEN<w>:TRACk:CSIGnal"
on page 1090
on page 1093
on page 1092
:WGEN<w> Commands
1091
34