Search:mode - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

29
:SEARch Commands

:SEARch:MODE

Command Syntax
:SEARch:MODE <value>
<value> ::= {EDGE | GLITch | RUNT | TRANsition | SERial{1 | 2}}
The :SEARch:MODE command selects the search mode.
The command is only valid when the :SEARch:STATe is ON.
Query Syntax
:SEARch:MODE?
The :SEARch:MODE? query returns the currently selected mode or OFF if
the :SEARch:STATe is OFF.
Return Format
<value><NL>
<value> ::= {EDGE | GLIT | RUNT | TRAN | SER{1 | 2} | OFF}
See Also •
•
820
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:STATe" on page 821
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide