Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 302

13
:DIGital<d> Commands
The DIGital subsystem commands control the viewing, labeling, and
positioning of digital channels. They also control threshold settings for
groups of digital channels, or pods.
These commands are only valid for the MSO models.
N O T E
Reporting the Setup
Use :DIGital<d>? to query setup information for the DIGital subsystem.
Return Format
The following is a sample response from the :DIGital0? query. In this case,
the query was issued following a *RST command.
:DIG0:DISP 0;THR +1.40E+00;LAB 'D0';POS +0
302 Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide