Power:inrush:exit - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

25
:POWer Commands

:POWer:INRush:EXIT

Command Syntax
:POWer:INRush:EXIT
The :POWer:INRush:EXIT command exits (stops) the inrush current power
analysis.
This command is equivalent to pressing the Exit softkey on the oscilloscope
front panel during the analysis.
See Also
•
•
566
(see page 1208)
":POWer:INRush:APPLy"
":POWer:INRush:NEXT"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 565
on page 567