Sbus<N>:I2S:trigger:pattern:format - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

28
:SBUS<n> Commands
:SBUS<n>:I2S:TRIGger:PATTern:FORMat
Command Syntax
:SBUS<n>:I2S:TRIGger:PATTern:FORMat <base>
<base> ::= {BINary | HEX | DECimal}
The :SBUS<n>:I2S:TRIGger:PATTern:FORMat command sets the entry (and
query) number base used by the :SBUS<n>:I2S:TRIGger:PATTern:DATA
command. The default <base> is DECimal.
Query Syntax
:SBUS<n>:I2S:TRIGger:PATTern:FORMat?
The :SBUS<n>:I2S:TRIGger:PATTern:FORMat? query returns the currently
set number base for I2S pattern data.
Return Format
<base><NL>
<base> ::= {BIN | HEX | DEC}
See Also
•
•
•
718
(see page 1208)
"Introduction to :TRIGger Commands"
":SBUS<n>:I2S:TRIGger:AUDio"
":SBUS<n>:I2S:TRIGger"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 935
on page 715
on page 713