Search:glitch:qualifier - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:SEARch:GLITch:QUALifier

Command Syntax
:SEARch:GLITch:QUALifier <operator>
<operator> ::= {GREaterthan | LESSthan | RANGe}
This command sets the mode of operation of the glitch (pulse width)
search. The oscilloscope can search for a pulse width that is greater than
a time value, less than a time value, or within a range of time values.
Query Syntax
:SEARch:GLITch:QUALifier?
The :SEARch:GLITch:QUALifier? query returns the glitch (pulse width)
qualifier.
Return Format
<operator><NL>
<operator> ::= {GRE | LESS | RANG}
See Also
•
•
•
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
Chapter 29, ":SEARch Commands," starting on page 817
":SEARch:GLITch:SOURce"
":SEARch:MODE" on page 820
on page 831
29
:SEARch Commands
829